Fodamon

Industry News

Can the crusher work properly at high temperature?

mobile crusher10.jpg  

Engineer from Fodamon has some suggestions for you as below:

 
1. Do a good job in daily maintenance of mobile crusher equipment
Regular inspection of equipment, replacement of butter, adjustment of belt, inspection of core components and wear-resistant parts, operators should often check the value of various thermometers in their work, find problems and immediately stop checking, troubleshooting. For those who can't find the cause for a time, we must not leave the crusher working without treatment.
 
2. Clean up oil and dust in time, keep engine heat dissipation in good condition
Although some equipments are equipped with dust-proof system to reduce the probability of shutdown caused by dust, the dust problem will become more serious in summer due to high temperature and dry air. For example, it is necessary to check the fixed bolts of conical breaking dust-proof sealing slip rings regularly to prevent dust-proof sealing and slip rings from falling off, so that a large number of dust and ore enter the body, resulting in scrap of crushers or major economic losses.
mobile crusher3.jpg mobile crusher1.jpg
 
3. Replace oil in time and check for oil leakage
In order to replace the proper oil viscosity grade for equipment, the oil viscosity grade in summer is generally higher than that at other times. Motor oil and lubricating oil everywhere need to be replaced and used in summer. The amount of oil is suitable. Check whether there is oil leakage frequently. Fuel should be replenished in time.
 
4. Regular inspection of cooling and fuel system
Check whether the cooling system and fuel system are smooth, and replace the aging wires, plugs, tubing, screw, tighten the fuel pipeline to prevent fuel leakage.
 
5. Pay attention to the bearing temperature of crusher and keep good lubrication
In the operation of crusher, we should always pay attention to the temperature of crusher bearing. Under normal working conditions, the temperature rise of bearing should be within 35 degrees, not more than 70 degrees. Bearing keeps good lubrication condition, and pay attention to abnormal sound and vibration.
 
6. Avoid sun exposure and pay attention to sunscreen
Whether the equipment is in shutdown or working state, try to put the equipment in a cool place, such as temporary shade, sunscreen, etc. to avoid long-term exposure to the sun, leading to equipment aging, affecting the quality of work and work efficiency.
mobile crusher18.jpg mobile crusher16.jpg
 
7. Ensure ventilation and permeability of equipment
The environment of indoor equipment is well set in the place with good ventilation. At the same time, attention should be paid to adjusting the ventilation and permeability of indoor temperature and surrounding environment. The temperature does not exceed 40 degrees, which provides a good working environment for crusher.
 
Under high temperature, mobile crusher equipment is more likely to fail in the use process, so we should pay more attention to the maintenance and maintenance of crusher, eliminate the big failures in the budding state, while ensuring the normal operation of production, ensure the personal safety of equipment operators.

 

Message
If you have any suggestions or question for us.Please contact us.