Fodamon

HGM Micro Powder Mill

HGM Micro Powder Mill

Applied Materials:

Limestone, calcite, calcium carbonate, dolomite, barite, talc, gypsum, diabase, quartzite, bentonite, etc.


Applications:

Crushing of calcium carbonate, processing of gypsum powder, desulfurization of power plants, milling of non-metallic minerals and preparation of pulverized coal.

Description

Introduction of HGM Micro Powder Mill

HGM Micro Powder Mill is our company according to the actual situation of the use of grinding equipment for many years, in view of the needs of the development of the grinding powder industry, the new type of grinding technology and ideas at home and abroad are absorbed and the new products with international technical level have been developed. The Micro Powder Mill is suitable for processing all kinds of non flammable and explosive mineral materials under 9.3 moth hardness and less than 7% humidity. It is ideal for processing quartz, feldspar, calcite, limestone, talcum, ceramics, marble, granite, aluminite, bauxite, iron ore, barite, bentonite, coal gangue, coal and other materials. The fineness of the material can be adjusted between 0.18 mm (80 mesh) to 0.010 mm (1250 mesh), and some materials can reach 2000 mesh.
Three-ring-medium-speed-micro-powder-grinding-fodamon-machin
 

Working Principle

The material is broken into small particles by the crusher, and the bucket elevator is sent to the storage hopper, and then the electromagnetic vibrating feeder is fed into the main engine for grinding. The grinding roll device in the main engine is rotated around the center axis, and the grinding roll is rotated around the grinding roller shaft. Under the action of the centrifugal force, the grinding roller compacts the grinding ring outward, and the revolving spatula is thrown between the roller rings and the roller is rolled to crush and grind. The powder of the grinding chamber is blown to the analysis machine above the main engine by the air blower of the blower. The finer is still falling into the main engine and regrinding. The fineness goes into the large cyclone collector with the specifications. After collection, the finished product is discharged through the discharge pipe, and the purified gas flows through the pipe on the large cyclone collector into the blower. The wind path is circular, except the blower to the grinding chamber is positive pressure, the air flow in the other pipelines is under negative pressure, the dust is not spilled, and the environment is free from pollution. Because the moisture content of the material is evaporated to gas during the grinding, the gas in the pipe in the joint of the flange and the inlet of the pipe leads to the increase of the air volume in the circulating air road, and the increased air volume is discharged after the purge of the bag filter.

Three-ring-medium-speed-micro-powder-grinding-fodamon-machin
 

Advantages of Fodamon HGM Micro Powder Mill
 


Three-ring-medium-speed-micro-powder-grinding-fodamon-machin
Three-ring-medium-speed-micro-powder-grinding-fodamon-machin
Three-ring-medium-speed-micro-powder-grinding-fodamon-machin
Three-ring-medium-speed-micro-powder-grinding-fodamon-machin

Technical Data
 

Model

Average work diameter
(mm)

Ring roller(pcs)

Roller ring (pcs)

Feeding size (mm)

Final product size

Capacity (t/h)

Motor power (kw)

Overall size
(LxWxH)
(m)

Micro

Mesh

Main unit

Powder concentrator

Fan

Feeder

Discharge valve

HGM-8021

800

21

3

≤ 10

5-47

3250-325

0.6-4

75

22

45

0.06

0.75

11.9×2.7×5.8

HGM-1027

1000

27

3

≤ 20

0.9-6

110

30

75

0.15

1.1

15.5×4.5×8.6

HGM-1036

1000

36

4

≤ 20

1.2-10

132

37

75

0.15

1.1

18×4.6×8.6

Note: This is just reference. Please contact us to get price and details.

Message
If you have any suggestions or question for us.Please contact us.